• Pneumatic Clutch to mimic speed of processing machine as parts are received onto the conveyor.
• Remote control and Variable Speed Drive (0-120FPM)
• Max Drive -- Powered rollers driven from underneath by a series of pulleys and belts
• Two-inch roller spacing for small parts
• Steel Rollers with PVC Sleeve
• One Infeed Arm
• Urethane Transfer Belts
• Teflon-Lined Steel Slides on receiver

 

• Adjustable Height from 32" to 42" without casters; and 36" to 45" with casters
• Frame--Heavy-duty 2" welded square tubing with adjustable jack legs
• Voltage & Amp requirements:
  

  440/460/480 Volts	3 Phase 6 Amps
  208/220/230 Volts	3 Phase 10 Amps

• Horsepower:
  

  1HP or 2HP (Motor size is determined by various factors)

• Air Requirements
  

  60lbs. @ 10CFM

Machine Operation:

1. A feed roller and a powered arm guide parts onto the receiver.
2. A slip clutch matches processing speed then accelerates parts on the conveyor.
3. Urethane belts move the parts from the receiver section to the return section.
4. Parts may be butt-fed, since the process is continuous.