Turnbak Return Conveyor

Specifications

  • Roller Drive System – Reliable Max Drive System
  • PLC Controlled
  • Two-Inch Roller Spacing for Small Parts (Pwrd Roller, Filler, Pwrd Roller)
  • Urethane Transfer Belts
  • Steel Rollers with PVC Sleeve
  • Powered Infeed Arms
  • Air Requirement:  90lbs @ 10cfm
  • Horsepower:  1-2HP (Depending on Size)
  • Adjustable Height Std 32″ to 42″ Without Casters; and 36″ to 45″ With Casters
  • Heavy Duty Frame – 2″ Structural Steel Tubing with Adjustable Jack Legs
  • HMI Operator Interface Remote
  • Speed Matched Variable Speed Drive (0-120fpm)
  • Clutched Infeed Arms
  • Urethane or UHMW Sleeved Rollers
  • Casters
  • Air Tables
  • Expandable Bridges
  • Small Parts Retriever

  • Single Phase Voltage
Options for Heavy Parts
  • Low Friction Roller Belt Slides
  • Automatic Turner for Heavy Parts
  • Reinforced Transfer V-Belts
  • Air Tables
  • 3 Position Outfeed Lift Tray – Helps in Assisting Transfer of Large Panels used in conjunction with Bolt On Return Conveyor Outrigger
  1. Photo eye detects the trailing edge of parts coming from a machine. This causes the receiver rollers to lower.
  2. Urethane belts move parts from the receiver section to the return side.
  3. After the part leaves the receiver section, the rollers raise to accept the next part and the cycle is repeated.

Urethane transfer belts delicately transfer parts to be returned to the operator.

  • Pneumatic Infeed Lift Tray – Complete level drop with mechanical torque arms tied together with an adjustable torque link.
  • Powered Infeed Arms – Pneumatically clutched to match outfeed speed of the processing machine.
  • Automatic Turn of Rectangular Parts – No optional attachment needed
  • Optional — Automatic Turner for Heavy Parts
  • Two-Inch Roller Spacing — Return small parts without additional attachment
  • Urethane Transfer Belts — Transfer parts easily and are durable for a long life
  • Frictionless Heavy Parts Transfer — For non-typical heavy parts (OPTIONAL)
  • Variable-Speed Rollers — Roller speed can match speed of processing machine
  • Portable Remote Control — Puts controls at operators station
  • Steel Rollers with PVC Sleeves — For Stability & Strength

440 Volts

    • 3 Phase
    • 60 Hertz
    • 6 Amps

460 Volts

    • 3 Phase
    • 60 Hertz
    • 10 Amps

Horsepower:

  • 1 HP (up to 20ft of Powered Return)
  • Multiple 1 HP Motors for +21′ of Return

Air Requirements:

  • 90lbs @ 10CFM

 

Videos

Gallery